YSV7N-GP
YSV7N-GP

YSV7N-GP

FOB
Shipping:
Air freight, Land freight, Ocean freight
Product details
Essential details
Shipping:Air freight, Land freight, Ocean freight
Product Introduction
Performance Parameters
Contact Form
1 Normally Open (1H) 
Contact Voltage Drop
Typical: 5mV (at 10A, initial)
Max.: 15mV (at 10A, initial)
Rated Load ⁽¹⁾
120A (at 23℃), 100A (at 85℃)
Overload Capacity ⁽¹⁾
180A for 1min (at 23℃)
600A for 1S (at 23℃)
Max. Switching Current ⁽¹⁾
Make: 200A; Break: 120A (resistive), 14VDC
Operating Current Range
1A ~ 120A
Electrical Endurance ⁽¹⁾
 See "Contact Parameters"
Mechanical Endurance
1×10⁷ cycles, 300 cycles/min
Insulation Resistance
100MΩ (at 500VDC, 1min, initial)
20MΩ (at 500VDC, 1min, after test)
Dielectric Withstand Voltage ⁽²⁾
600VAC, 1min (between open contacts)
600VAC, 1min (between coil and contacts)
Operating Time ⁽³⁾
Typical: 8ms (measured at rated voltage)
Max.: 15ms (measured at rated voltage)
Release Time ⁽³⁾
Typical: 2ms (measured at rated voltage)
Max.: 7ms (measured at rated voltage)
Ambient Conditions
Temp.: -40℃ ~ 85℃ (holding voltage applied to coil terminals)
Humidity: 5%RH ~ 85%RH (no condensation, no icing)
Vibration Resistance ⁽⁴⁾ (Random, No Misoperation)
Vibration frequency: 10Hz ~ 1000Hz, acceleration: 27.8m/s²
8 hours per axis
Shock Resistance ⁽⁴⁾
294m/s² (half-sine pulse, pulse width: 11ms)
Terminal Type ⁽⁵⁾
PCB Terminals (Printed Circuit Board Terminals)
Weight
Approx. 35g
Mechanical Properties
Housing retention force (tension & compression): ≥200N
Terminal retention force (tension & compression): ≥50N
Terminal bending resistance (all directions): ≥10N

Notes

(1) Test conditions:
(a) Relay mounted on PCB; apply rated voltage to coil for 100ms, then maintain 80% rated voltage.
(b) Use 25mm wire for connection between PCB and load device.
(c) PCB specification: 4-layer board, copper thickness 2oz; length & width of each copper trace (64±1) mm; PCB Tg = 150℃.
(2) Leakage current less than 1mA.
(3) Measured value when coil has no parallel resistor or diode.
(4) When energized, bounce time of closed contacts < 100μs;
When de-energized, closing time of open contacts < 100μs.
(5) Lead-free solder is recommended for soldering; recommended reflow soldering temperature & time: (260±3)℃, (10±0.5)s.

Coil Parameters
Rated Voltage(VDC)
Operating Voltage (VDC)
Release Voltage (VDC)
Coil Resistance ×(1±10%) Ω
Max. Allowable Coil Voltage (VDC)
Coil Holding Voltage (VDC)
Coil Power(W)
12≤8.0
≥1.0
11018(50%–100%) Uₙ (at 23℃)
(50%–60%) Uₙ (at 85℃)
Approx. 1.31
24≤16.0
≥2.0
38436(50%–60%) Uₙ (at 85℃)
Approx. 1.50

ChatGPT Image 2026年6月3日 15_04_50.png

Anhui Yisuo Electronic Technology Co., Ltd., referred to as “Yisuo Electronic,” was established in May 2007 in Hefei, Anhui, China. The company is a comprehensive enterprise integrating research and development, manufacturing and sales. Its main products include automotive relays and high voltage DC contactors.
Yisuo focuses on new energy vehicles, power batteries, energy storage, charging piles, engineering vehicles, lithium batteries, automotive wiring harnesses, central control boxes and automotive air-conditioning applications. We provide customers with stable, reliable and cost-effective electrical control components and supporting services.

 Our products are widely used in traditional fuel vehicles, new energy vehicles, charging facilities, photovoltaic and wind power systems, military applications, energy storage systems and power supply base stations. Public website information also confirms that Yisuo specializes in the R&D, production and sales of automotive relays and high voltage DC contactors for these application fields.

Company Overview

微信图片_2026-04-29_151531_583.png

QUALIFICATION

微信图片_20260429154113_19_115.jpg微信图片_2026-04-29_151122_271.png微信图片_2026-04-29_151250_168.png

Contact

Leave your information and we will contact you.

电话
WhatsApp