필수 정보
배송 방법:空运, 陆运, 海运
제품 소개
Performance Parameters
| Contact Form | 1 Normally Open (1H) |
| Contact Voltage Drop | Typical: 5mV (at 10A, initial)Max.: 15mV (at 10A, initial) |
| Rated Load ⁽¹⁾ | 120A (at 23℃), 100A (at 85℃) |
| Overload Capacity ⁽¹⁾ | 180A for 1min (at 23℃)600A for 1S (at 23℃) |
| Max. Switching Current ⁽¹⁾ | Make: 200A; Break: 120A (resistive), 14VDC |
| Operating Current Range | 1A ~ 120A |
| Electrical Endurance ⁽¹⁾ | See "Contact Parameters" |
| Mechanical Endurance | 1×10⁷ cycles, 300 cycles/min |
| Insulation Resistance | 100MΩ (at 500VDC, 1min, initial)20MΩ (at 500VDC, 1min, after test) |
| Dielectric Withstand Voltage ⁽²⁾ | 600VAC, 1min (between open contacts)600VAC, 1min (between coil and contacts) |
| Operating Time ⁽³⁾ | Typical: 8ms (measured at rated voltage)Max.: 15ms (measured at rated voltage) |
| Release Time ⁽³⁾ | Typical: 2ms (measured at rated voltage)Max.: 7ms (measured at rated voltage) |
| Ambient Conditions | Temp.: -40℃ ~ 85℃ (holding voltage applied to coil terminals)Humidity: 5%RH ~ 85%RH (no condensation, no icing) |
| Vibration Resistance ⁽⁴⁾ (Random, No Misoperation) | Vibration frequency: 10Hz ~ 1000Hz, acceleration: 27.8m/s²8 hours per axis |
| Shock Resistance ⁽⁴⁾ | 294m/s² (half-sine pulse, pulse width: 11ms) |
| Terminal Type ⁽⁵⁾ | PCB Terminals (Printed Circuit Board Terminals) |
| Weight | Approx. 35g |
| Mechanical Properties | Housing retention force (tension & compression): ≥200NTerminal retention force (tension & compression): ≥50NTerminal bending resistance (all directions): ≥10N |
Notes
(1) Test conditions:
(a) Relay mounted on PCB; apply rated voltage to coil for 100ms, then maintain 80% rated voltage.
(b) Use 25mm wire for connection between PCB and load device.
(c) PCB specification: 4-layer board, copper thickness 2oz; length & width of each copper trace (64±1) mm; PCB Tg = 150℃.
(2) Leakage current less than 1mA.
(3) Measured value when coil has no parallel resistor or diode.
(4) When energized, bounce time of closed contacts < 100μs;
When de-energized, closing time of open contacts < 100μs.
(5) Lead-free solder is recommended for soldering; recommended reflow soldering temperature & time: (260±3)℃, (10±0.5)s.
Coil Parameters
| Rated Voltage(VDC) | Operating Voltage (VDC) | Release Voltage (VDC) | Coil Resistance ×(1±10%) Ω | Max. Allowable Coil Voltage (VDC) | Coil Holding Voltage (VDC) | Coil Power(W) |
| 12 | ≤8.0 | ≥1.0 | 110 | 18 | (50%–100%) Uₙ (at 23℃)(50%–60%) Uₙ (at 85℃) | Approx. 1.31 |
| 24 | ≤16.0 | ≥2.0 | 384 | 36 | (50%–60%) Uₙ (at 85℃) | Approx. 1.50 |
